infercallChoosing a country moves to that country's site.Log inGet Australia mobile call forwarding instructions. Choose your provider and destination number below.
Before you change anything: check and record the current destination for each selected condition. Confirm plan restrictions and charges, and select the correct SIM.
The activation codes below use an example number. Enter your own valid domestic destination above; copying activation or downloading this setup stays disabled until then.
Reference code coverage: Unanswered + Busy + Phone off or no signal.
Enter each distinct command manually in your dial pad, then press Call/Send and wait for carrier confirmation. This page never dials a code.
Unanswered
**61*0491570006*11#Busy
**67*0491570006*11#Phone off or no signal
**62*0491570006*11#Telstra forwards unanswered calls after 15 seconds by default.
Turn off only the conditions shown here. This stops that forwarding; it does not necessarily restore your previous voicemail or other destination.
Unanswered
##61#Busy
##67#Phone off or no signal
##62#Stopping forwarding is not necessarily restoring the previous voicemail or other destination. Restore recorded destinations separately using your provider's instructions, then test.
Telstra separately documents **004*101# to restore conditional MessageBank. It replaces conditional destinations; it is not an arbitrary-number activation shortcut or a restoration of every previous setting. Separate Telstra restoration instructions.
Unanswered
*#61# Busy
*#67# Phone off or no signal
*#62# After setting up forwarding, call your business number from another phone to check that calls reach your receptionist when you expect. After turning forwarding off, check that calls ring through normally again.
Every code here is from Telstra's own support page.
Sources: Telstra support.
This download contains your destination number. Keep it on your own device; the shared QR/link never includes it.
Choose your provider and destination above, then keep these two steps handy. This routine uses all-call forwarding, independently of the individual code mode selected above. You make each switch yourself.
Settings → Apps → Phone → Call Forwarding. Choose the correct SIM/line. Turn on, enter the Forward To number and tap Back. Return here to turn off. Cellular coverage and carrier support are required.
Before starting, note any existing all-calls destination. Turning forwarding off does not restore that old route. Keep your separate busy, unanswered and unreachable settings; don’t use “cancel all”. Check your plan restrictions and forwarding charges.
Enter your own valid destination above to prepare and save the routine. No example number will be saved.
Turn on All calls / Always forward to your Infercall number.
Use the provider/device instructions to turn off that same all-calls setting, or leave Infercall answering. This stops that route; restore any previous destination separately if needed. Do not use a broad reset to preserve other diverts.
Save only on your own device. “Save on this browser” stores the provider, destination and device choice locally until you clear it or browser data is removed. A Home Screen shortcut opens the tool, not a carrier command. Use “Load saved routine” here when you return.
iPhone: in Safari, Share → Add to Home Screen → Add. Android: in Chrome’s menu, use the website shortcut / Add to Home screen option (wording varies). You can bookmark this page instead.
iPhone blocks forwarding-code links. Saved contact/speed-dial support for these service codes has not been verified; we don’t offer an installable one-tap dial shortcut. Copy or download the instructions, then use the provider’s manual route.
Sources: Telstra forwarding; Apple forwarding; Samsung settings; Safari Home Screen; Chrome shortcuts.
Want missed calls answered? Forward them to Infercall. It picks up 24/7, answers questions and books the work in.
Start with your websiteA call comes in to your mobile. What happens next depends on which forwarding you've turned on:
You still answer when you can. Ring time is set in seconds, roughly 5 seconds per ring, so 20 seconds is about 4 rings.
Only calls that arrive while you're on the phone (and on many phones, calls you decline).
Covers a flat battery, flight mode or no coverage.
For after hours, holidays or when you can't take calls at all. If it's on, it overrides the other three.
Types 1 to 3 are called conditional forwarding. Your provider may support only some of them, combine conditions in one command or require app settings. Follow the selected setup and its matching undo. A broad reset can remove voicemail routes too; restore previous destinations separately.
Recommended setup for a business: forward when you don't answer, when you're busy and when your phone is off, where your provider supports those conditions, all to your answering number. With no-answer forwarding, your phone rings first, so you pick up the calls you can, and the rest are still answered.
Replace NUMBER with the number you want calls to go to.
Every code here is from Telstra's own support page. Replace NUMBER with the destination number, including its area code.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER*11# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER*11# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER*11# | ##62# | *#62# |
| All calls | **21*NUMBER*11# | ##21# | *#21# |
Confirmed by the network. Source: Telstra support.
Codes from Optus's own support page. Replace NUMBER with the destination number, including its area code.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER**20# | ##61# | Use your phone settings |
| When I'm on another call | **67*NUMBER# | ##67# | Use your phone settings |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | Use your phone settings |
| All calls | **21*NUMBER# | ##21# | Use your phone settings |
Confirmed by the network. Source: Optus support.
Every code here is from Vodafone's own support page. Replace NUMBER with the destination in +61 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER# | #61# | *#61# |
| When I'm on another call | **67*NUMBER# | #67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | #62# | *#62# |
| All calls | **21*NUMBER# | #21# | *#21# |
Cancel every divert: ##002#. Confirmed by the network. Source: Vodafone support.
Find your brand below. Where a reseller hasn't published its own codes, we show the host network's codes and label them. Plan restrictions and charges can differ: expand your provider for its full table, notes and sources, or use the generator with your number.
Boost Mobile runs on Telstra's network and publishes these codes on its own help page. Replace NUMBER with the destination number, including its area code.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER*10# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER*10# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER*10# | ##62# | *#62# |
| All calls | **21*NUMBER*10# | ##21# | *#21# |
Unanswered calls: Boost forwards unanswered calls after about 15 seconds.
Source: Boost Mobile help; Boost Mobile runs on Telstra; Telstra codes.
Belong runs on Telstra's network, so these are Telstra's codes. Belong doesn't publish its own. Replace NUMBER with the destination number, including its area code.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER*11# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER*11# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER*11# | ##62# | *#62# |
| All calls | **21*NUMBER*11# | ##21# | *#21# |
Unanswered calls: Telstra forwards unanswered calls after 15 seconds by default.
Source: Telstra codes (Telstra support); Belong runs on Telstra.
ALDI Mobile runs on Telstra's network, so these are Telstra's codes. ALDI Mobile doesn't publish its own. Replace NUMBER with the destination number, including its area code.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER*11# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER*11# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER*11# | ##62# | *#62# |
| All calls | **21*NUMBER*11# | ##21# | *#21# |
Unanswered calls: Telstra forwards unanswered calls after 15 seconds by default.
Source: Telstra codes (Telstra support); ALDI Mobile runs on Telstra.
Everyday Mobile (Woolworths) runs on Telstra's network, so these are Telstra's codes. Everyday Mobile (Woolworths) doesn't publish its own. Replace NUMBER with the destination number, including its area code.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER*11# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER*11# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER*11# | ##62# | *#62# |
| All calls | **21*NUMBER*11# | ##21# | *#21# |
Unanswered calls: Telstra forwards unanswered calls after 15 seconds by default.
Source: Telstra codes (Telstra support); Everyday Mobile (Woolworths) runs on Telstra.
Exetel runs on Telstra's network, so these are Telstra's codes. Exetel doesn't publish its own. Replace NUMBER with the destination number, including its area code.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER*11# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER*11# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER*11# | ##62# | *#62# |
| All calls | **21*NUMBER*11# | ##21# | *#21# |
Unanswered calls: Telstra forwards unanswered calls after 15 seconds by default.
Source: Telstra codes (Telstra support); Exetel runs on Telstra.
Superloop runs on Telstra's network, so these are Telstra's codes. Superloop doesn't publish its own. Replace NUMBER with the destination number, including its area code.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER*11# | ##61# | *#61# |
| When I'm on another call | **67*NUMBER*11# | ##67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER*11# | ##62# | *#62# |
| All calls | **21*NUMBER*11# | ##21# | *#21# |
Unanswered calls: Telstra forwards unanswered calls after 15 seconds by default.
Source: Telstra codes (Telstra support); Superloop runs on Telstra.
amaysim runs on Optus's network, so these are Optus's codes. amaysim doesn't publish its own. Replace NUMBER with the destination number, including its area code.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER**20# | ##61# | Use app or phone settings |
| When I'm on another call | **67*NUMBER# | ##67# | Use app or phone settings |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | Use app or phone settings |
| All calls | **21*NUMBER# | ##21# | Use app or phone settings |
Unanswered calls: you choose 5 to 30 seconds in the code (about 1 ring to about 6 rings).
Coles Mobile runs on Optus's network, so these are Optus's codes. Coles Mobile doesn't publish its own. Replace NUMBER with the destination number, including its area code.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER**20# | ##61# | Use app or phone settings |
| When I'm on another call | **67*NUMBER# | ##67# | Use app or phone settings |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | Use app or phone settings |
| All calls | **21*NUMBER# | ##21# | Use app or phone settings |
Unanswered calls: you choose 5 to 30 seconds in the code (about 1 ring to about 6 rings).
Source: Optus codes (Optus support); Coles Mobile runs on Optus.
Dodo runs on Optus's network, so these are Optus's codes. Dodo doesn't publish its own. Replace NUMBER with the destination number, including its area code.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER**20# | ##61# | Use app or phone settings |
| When I'm on another call | **67*NUMBER# | ##67# | Use app or phone settings |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | Use app or phone settings |
| All calls | **21*NUMBER# | ##21# | Use app or phone settings |
Unanswered calls: you choose 5 to 30 seconds in the code (about 1 ring to about 6 rings).
SpinTel runs on Optus's network, so these are Optus's codes. SpinTel doesn't publish its own. Replace NUMBER with the destination number, including its area code.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER**20# | ##61# | Use app or phone settings |
| When I'm on another call | **67*NUMBER# | ##67# | Use app or phone settings |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | Use app or phone settings |
| All calls | **21*NUMBER# | ##21# | Use app or phone settings |
Unanswered calls: you choose 5 to 30 seconds in the code (about 1 ring to about 6 rings).
Yomojo runs on Optus's network, so these are Optus's codes. Yomojo doesn't publish its own. Replace NUMBER with the destination number, including its area code.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER**20# | ##61# | Use app or phone settings |
| When I'm on another call | **67*NUMBER# | ##67# | Use app or phone settings |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | Use app or phone settings |
| All calls | **21*NUMBER# | ##21# | Use app or phone settings |
Unanswered calls: you choose 5 to 30 seconds in the code (about 1 ring to about 6 rings).
Southern Phone runs on Optus's network, so these are Optus's codes. Southern Phone doesn't publish its own. Replace NUMBER with the destination number, including its area code.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER**20# | ##61# | Use app or phone settings |
| When I'm on another call | **67*NUMBER# | ##67# | Use app or phone settings |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | Use app or phone settings |
| All calls | **21*NUMBER# | ##21# | Use app or phone settings |
Unanswered calls: you choose 5 to 30 seconds in the code (about 1 ring to about 6 rings).
Source: Optus codes (Optus support); Southern Phone runs on Optus.
OnePass mobile (formerly Catch Connect) runs on Optus's network, so these are Optus's codes. OnePass mobile (formerly Catch Connect) doesn't publish its own. Replace NUMBER with the destination number, including its area code.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER**20# | ##61# | Use app or phone settings |
| When I'm on another call | **67*NUMBER# | ##67# | Use app or phone settings |
| When my phone is off or has no signal | **62*NUMBER# | ##62# | Use app or phone settings |
| All calls | **21*NUMBER# | ##21# | Use app or phone settings |
Unanswered calls: you choose 5 to 30 seconds in the code (about 1 ring to about 6 rings).
Source: Optus codes (Optus support); OnePass mobile (formerly Catch Connect) runs on Optus.
TPG runs on Vodafone (Australia)'s network and publishes these codes on its own help page. Replace NUMBER with the destination in +61 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER# | #61# | *#61# |
| When I'm on another call | **67*NUMBER# | #67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | #62# | *#62# |
| All calls | **21*NUMBER# | #21# | *#21# |
Unanswered calls: the network sets the ring time; it isn't set in the code.
Source: TPG support; TPG runs on Vodafone (Australia); Vodafone (Australia) codes.
iiNet runs on Vodafone (Australia)'s network, so these are Vodafone (Australia)'s codes. iiNet doesn't publish its own. Replace NUMBER with the destination in +61 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER# | #61# | *#61# |
| When I'm on another call | **67*NUMBER# | #67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | #62# | *#62# |
| All calls | **21*NUMBER# | #21# | *#21# |
Unanswered calls: the network sets the ring time; it isn't set in the code.
Source: Vodafone (Australia) codes (Vodafone support); iiNet runs on Vodafone (Australia).
felix runs on Vodafone (Australia)'s network. felix publishes some of these codes itself; the rest are Vodafone (Australia)'s codes. Replace NUMBER with the destination in +61 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER# | #61# | *#61# |
| When I'm on another call | **67*NUMBER# | #67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | #62# | *#62# |
| All calls | **21*NUMBER# | #21# | *#21# |
Unanswered calls: the network sets the ring time; it isn't set in the code.
Source: felix help (all-calls code); felix runs on Vodafone (Australia); Vodafone (Australia) codes.
Kogan Mobile runs on Vodafone (Australia)'s network, so these are Vodafone (Australia)'s codes. Kogan Mobile doesn't publish its own. Replace NUMBER with the destination in +61 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER# | #61# | *#61# |
| When I'm on another call | **67*NUMBER# | #67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | #62# | *#62# |
| All calls | **21*NUMBER# | #21# | *#21# |
Unanswered calls: the network sets the ring time; it isn't set in the code.
Source: Vodafone (Australia) codes (Vodafone support); Kogan Mobile runs on Vodafone (Australia).
Lebara (Australia) runs on Vodafone (Australia)'s network, so these are Vodafone (Australia)'s codes. Lebara (Australia) doesn't publish its own. Replace NUMBER with the destination in +61 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER# | #61# | *#61# |
| When I'm on another call | **67*NUMBER# | #67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | #62# | *#62# |
| All calls | **21*NUMBER# | #21# | *#21# |
Unanswered calls: the network sets the ring time; it isn't set in the code.
Source: Vodafone (Australia) codes (Vodafone support); Lebara (Australia) runs on Vodafone (Australia).
Lycamobile (Australia) runs on Vodafone (Australia)'s network, so these are Vodafone (Australia)'s codes. Lycamobile (Australia) doesn't publish its own. Replace NUMBER with the destination in +61 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER# | #61# | *#61# |
| When I'm on another call | **67*NUMBER# | #67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | #62# | *#62# |
| All calls | **21*NUMBER# | #21# | *#21# |
Unanswered calls: the network sets the ring time; it isn't set in the code.
Source: Vodafone (Australia) codes (Vodafone support); Lycamobile (Australia) runs on Vodafone (Australia).
Moose Mobile runs on Vodafone (Australia)'s network, so these are Vodafone (Australia)'s codes. Moose Mobile doesn't publish its own. Replace NUMBER with the destination in +61 format, leaving out its first 0.
| Forward calls | Turn on | Turn off | Check |
|---|---|---|---|
| When I don't answer | **61*NUMBER# | #61# | *#61# |
| When I'm on another call | **67*NUMBER# | #67# | *#67# |
| When my phone is off or has no signal | **62*NUMBER# | #62# | *#62# |
| All calls | **21*NUMBER# | #21# | *#21# |
Unanswered calls: the network sets the ring time; it isn't set in the code.
Source: Vodafone (Australia) codes (Vodafone support); Moose Mobile runs on Vodafone (Australia).
Networks checked October 2026 against each provider's own coverage page or plan summary for the selected country. Providers can change networks, so check yours if a code doesn't work.
Using a business phone system or VoIP line? See our call forwarding guide for other providers.
Use the Turn off steps for your selected provider and the conditions you enabled. There is no universal cancellation code. A broad reset can also remove forwarding to voicemail. Restore any previous destinations separately, then test from another phone.
Every code here is from Telstra's own support page. Choose Telstra in the provider selector for its activation, turn-off and status instructions. Telstra forwards unanswered calls after 15 seconds by default.
Codes from Optus's own support page. Choose Optus in the provider selector for its activation, turn-off and status instructions. See its ring-time options and plan restrictions alongside the setup.
Every code here is from Vodafone's own support page. Choose Vodafone (Australia) in the provider selector for its activation, turn-off and status instructions. See its ring-time options and plan restrictions alongside the setup.
Ring time depends on your provider. Where it supports an adjustable time, choose the seconds in the tool. Otherwise follow the provider’s fixed ring-time note. One ring is roughly five seconds; test the result from another phone.
Conditional forwarding covers supported unanswered, busy or unreachable calls. All-call forwarding sends every call straight to the destination without ringing your phone. If all-call forwarding is on, it takes priority.
Choose your provider, then open the individual forwarding conditions. Some providers combine busy and unanswered calls or require phone settings instead of a code. The selected setup shows the conditions actually covered.
Choose your Australia mobile provider above to see its codes or app instructions, plan restrictions and charges. If it is not listed, check your provider’s current support instructions. Choose your mobile provider
You choose. Use “Let me answer first” for the supported busy, unanswered and unreachable conditions, or choose all calls when you want every call to go to your receptionist. Check the coverage shown for your provider.
It depends on your provider and plan. Read the charges and eligibility notes beside your selected setup and follow its linked sources to confirm your current plan, especially when roaming. A reseller’s rules can differ from its host network.
Yes. Use your Infercall number as the destination for your provider’s supported forwarding options. Test that calls reach your receptionist when you expect.
